$22.95

EZ-Rays LEDC1215WND Wide Input LED Driver (One & 2-Wire Modes)
[LEDC1215WND]

EZ-Rays LEDC1215WND Wide Input LED Driver (One & 2-Wire Modes)
Power LEDs as Common Ground Two-Wire or Tesla One-Wire

Super Efficient, 1.5 -12 Volts Wide Input LED driver
Uses batteries or wall adapters. Over 100 continuous hours using a single D cell or 30 hours from a single AA. Design will operate on input voltages less than 1V!

The LEDC15WND driver allows easy lighting on artwork, scale models and more! The small size footprint converter can be built directly into your work. Easy to use - power in / power out. Can be used to Illuminate a string of LEDs wired in series (up to 15) with no noticeable decrease in light emission or parallel (up to 20) and like our LEDC15MX driver, this LEDC15WND can also be used in Tesla One-Wire fashion (up to 30 SuperBrights) with 5V -12V power sources!

The driver is self regulating, so if you are using a string of 15 LEDs or string of 3, the output voltage will adjust accordingly up to the LED and driver maximums. In parallel mode the current will self regulate to the ratings of the LEDs and driver itself, using more current for 20 LEDs wired in parallel or less if using a smaller number of LEDs.

This is a great converter to incorporate into your solar lighting designs where you are using a solar cell which outputs 1.0 volt! This converter will step it up to to a useful voltage! Depending on your design you may use the same converter to charge batteries for future storage! As long as your battery has 0.8 Volt or more you can use it! Why waste that energy!

See the review here on ---> Startship Modeler

Includes:

  • Detailed instructions
  • (1) LEDC1512WND- Pulse switched DC/DC converter
     
    LEDC1512WND (Series/Parallel)
    Size
    14mm x 12mm x 8mm
    Weight
    8g
    Input
    1.0/2.4V - (2.5V-12V wResistor 47 Ohm) @150mA Max. DC
    Output
    ~6-50V@100-150mA Pulses
    Consumption
    5-25mA
    LED Specs
    Typical: If=20mA, Vf=3.4 - 4.1V
    Super-Bright, Ultra-Bright, Mega-Bright, Hyper, COB


     
    LEDC1512WND (Tesla One-Wire)
    Input
    1.5 -12V (wResistor 47 Ohm) @150mA Max. DC
    Output
    ~6-50V@30 -150mA Pulses
    LED Specs
    Typical: If=20mA, Vf=3.4 - 4.1V
    Super-Bright, Ultra-Bright, Mega-Bright, Hyper, COB
    LEDC1512WND DC Converter by Lochtech ElectronicsLEDC15 in operationLEDC1512WND usesHow to use

    Shed some light the easy and efficient way!
  • Reviews (2)
    Ask a question about this product
    Quick Find
     
    Use keywords to find the product you are looking for.
    Advanced Search
    We Accept
    Manufacturer Info
    EZRays
    EZRays Homepage
    Other products
    Share Product
    Share via E-Mail
    Share on Facebook Share on Twitter
    0 items
    BitCoin Accepted Here